SOLVED! “An Audio Stream Currently in Use”: Causes and Solutions

In the Windows system, sometimes, we see this message: An Audio Stream Currently in Use. This could be considered information that indicates some of the applications in your system are using the audio system to play sound. When this message appears, your computer will not go to sleep mode as some applications use the audio system. Here we will see the complications of this situation and several ways to fix the problems.

The Impact of “Audio Stream Currently in Use” on Your computer?

How to try Windows 11 without getting a new PC | Popular Science

After prolonged usage, it is required to keep your desktop or laptop in sleep mode, which keeps the system in a low-power state and helps to conserve energy. Simultaneously it gives the ability to resume the work from where it left off when the computer is woken up. However, the “Audio Stream Currently in Use” issue causes a tamper when putting the computer on sleep mode or power-saving mode.

Why do you see the message “Audio Stream Currently in Use”?

It indicates some of the applications in your Windows system are playing sound. Technically we call it streaming of windows. So, this is technically not an error; instead, it’s information that clarifies why your system is not able to go into sleep mode. Also, the same situation may occur while you try to keep your system on hibernate mode. In these scenarios, you will have to allow the application that is playing sound, and then you will have to override so that the computer is put to sleep even if that application is playing sound after a specific interval.

How to fix the “Audio Stream Currently in Use” issue on your computer?

There are several aspects you can look into to fix this issue. We will discuss all of them here:

Disable Cortana from Windows 10

Mostly, the Audio Stream Current in Use symptom appears because of the Cortana application in Windows. Hence if you are hitting this situation, it’s preferable to disable Cortana. To disable Cortana, follow the below instructions:

  • Step 1: Invoke gpedit.msc command and open Local Group Policy Editor window. Navigate to Computer Configuration > Windows Components > Search
  • Step 2: Locate the ‘Allow Cortana’ policy. Open the policy and set is disabled. Apply the settings, and this could potentially fix the problem.

Disable Line in Device from Sounds Setting

The other potential issue could be the Line In jack. It’s located on a sound card and controls various audio devices in the computer. To disable the Line In jack, follow the below instructions:

  • Step 1: Go to your computer’s taskbar and locate the sound icon. Mouse hover-over will display some menu options. Select sounds from the menu option.
  • Step 2: This will open the sound control panel. Navigate to the Recording tab. Select the Line in Device option and right-click on it. This will provide the disabled option. Select disable and apply the settings.

Reinstall Audio drivers

Another potential root cause is misconfigured or malfunctioned audio drivers. The best solution to eliminate this root cause is to reinstall the entire audio driver. The audio driver can be installed from the Windows Installer or the manufacturer’s website and downloaded to the installation media. Follow the below steps to reinstall your audio driver in the Windows system:

  • Step 1: Go to the start menu and open “Device Manager.” You can open it from Control Panel as well.
  • Step 2: Once the Device Manager window is open, expand the sound, video, and game controllers tree structure.
  • Step 3: Locate the audio driver and right-click on it. Select uninstall option from the appeared menu list.
  • Step 4: After the installation process is completed, you have to restart your computer. When the computer boots up, Windows will automatically install the audio drivers. The other way is to download the audio driver from the computer manufacturer’s website and install it manually.

Define an override on the Power Management Settings

The most probable reason your system will not go to sleep or hibernate mode is because of windows power management settings. That means if any application in your device is using the audio driver, it will be considered an active state and block the system from going into sleep mode. We can override this setting under Power Management which allows an application to use the audio drive and still allow the system to go into sleep mode. Try the following steps to override the power management settings:

  • Step 1: We need to open the command prompt with the admin feature enabled. To do this, simply take your mouse pointer in the command prompt icon and do a right-click. This will give a list of several options to open the command prompt. Select the ‘Run as Administrator’ option.
  • Step 2: Once the command prompt opens in administrator mode, type the following command powercfg /request and hit enter. This command will list down all the devices that are streaming audio. The following message, “An audio stream is currently in use,” will also list down.
  • Step 3: Once you identify the device streaming the audio, you need to override it. To override the device, use the following command: powercfg /requestsoverride DRIVER <DEVICE NAME> SYSTEM. Here <Device Name> must be replaced with your computer name. Once you hit Enter, this will override the power management settings for the given device.
  • Step 4: After these settings are performed successfully, the Windows system will go to sleep mode smoothly even if there is an audio device for streaming. This setting will also allow the system to go into hibernate mode.

Frequently Asked Questions

Top 5 Ways to Fix Windows 10 Won&#39;t Go to Sleep Mode Issue

1/ Why am I getting “Audio Stream Currently in Use” error in my Windows system?

It’s mostly because some of the applications in your device use the audio stream.

2/ When do I need to reinstall my audio drivers?

When an upgraded version is available or the audio file has been corrupted.

3/ Can I put my computer on sleep mode with audio streaming used by some application?

Windows will not allow you to put the computer in sleep mode when the audio stream is in use.

4/ How to override the power management configuration in my computer?

It can be done by using powercfg/request command

5/ Is it safe to ignore “Audio Stream Currently in Use” error in computer?

There is no harm because it’s a warning message only

Tips and Tricks

How To Turn Off Sleep Mode on Windows 10 - Ticswipe.com

  •         Put your system on sleep mode after prolonged use.
  •         Frequently check your audio driver’s performance.
  •         Upgrade your audio drivers when a new version is available.

 

Leave a Comment