SOLVED! Monitor “Out Of Range” Windows 10

Considering the role of monitors in computers, it’s only natural that monitor issues result in a lot of hassles. Currently, monitor “out of range” Windows 10 is one of the issues that plague monitors of Windows computers. Based on the reports of Windows users, the issue surfaces following Windows updates, resolution changes and so on. Read to the end if your monitor experiences the same issue and you like to bring it back to normal.

Causes

  • For the monitor to work, the screen resolution must be set to a value that it can support. If the screen resolution is set to something that the monitor cannot support, issues like “out of range” would appear. Hence, it’s a good idea to give resolution some thought.
  • Once it comes to monitor “out of range” windows 10, it’s wise to take display driver into account. The display driver plays a key role in the communication between computers and monitors. Thus, if the driver acts up, the monitor would go haywire.
  • You have multiple monitors and the “out of range” issue only appears on a secondary monitor? The issue might occur when the video card feeds the monitor a signal stream in excess.

Solutions

Tweak The Resolution

One of the easiest ways to handle the monitor “out of range” issue on Windows 10 is to apply changes to the resolution.

  • Step 1: Hover the mouse to the desktop background, right-click and pick “Display Settingson the drop-down menu.
  • Step 2: Choose “Advanced display settings”. For each display, 1,2… hit “Display adapter properties”.
  • Step 3: ClickList All Mode” on the adapter tab.
  • Step 4: Choose a range that is compatible with the monitor resolution.

Note: If you have trouble changing the resolution directly, boot into Safe Mode and tweak the resolution as you see fit.

  • Step 1: Start Windows in Safe mode.
  • Step 2: In Safe Mode, open Start menu, pick “Control Panel” and go to “Appearance and Personalization”. Next, hit “Adjust Screen Resolution” under ”Display”.
  • Step 3: On the drop-down list next to resolution, set the resolution to your liking by moving the slider. Lastly, select “Apply” then choose “Keep to use the new resolution as you restart.

Change The Refresh Rate

If the refresh rate you selected has a resolution higher than what the monitor supports, consider changing it.

  • Step 1: Restart the computer. While it is restarting, hit the F8 key till you see the Startup menu on the screen. Press 3, then “ENTER”. That will boot your computer in Safe mode.
  • Step 2: Right-click the desktop background, select “Display settings” and choose “Advanced display settings”. Then hit “Display adapter properties”, go to Monitor tab and change “Refresh Rate”.
  • Step 3: Hit “Apply”, pick “OK” and restart the system in Normal mode.

Start The Computer In Low Res Video Mode

  • Step 1: Connect your PC to a second monitor then give it time to load.
  • Step 2: As soon as the second monitor comes on, open the Start menu, hit Power and hold Shift as you click Restart. Wait until the PC gives you a number of options then hit Troubleshoot
  • Step 3: Go to “Start-up Settings”, press “Restartand wait for the computer to restart. When you get to choose between options again, select the third one to start your PC in low-resolution video mode.
  • Step 4: Reconnect the first monitor and wait for the system to load.
  • Step 5: Adjust the video resolution to the desired setting.

Update The Display Driver

Unable to recall the last time you dated the display driver of your Windows PC? In that case, as you troubleshoot monitor “out of range” Windows 10, you should update the display driver.

  • Step 1: Turn off the PC by long-pressing the “Power” button. Next, turn the computer on again by hitting the “Power” button.
  • Step 2: Repeat steps 1 several times until the recovery options appear. Proceed to hit the “Advanced repair option then pick “Troubleshootunder “Choose an option”. Next, select“Advanced options”, choose “Startup settings and hit “Restart”.
  • Step 3: As the system restarts, pick “Enable Safe Mode.
  • Step 4: When the screen comes back on, press “Windows + X” then click “Device manager”. Expand the network adapter, right-click your graphics card and hit Update driver.
  • Step 5: Hit “Browse my computer for driver software”, select “Let me pick from a list of device drivers on my computer” and choose  “Graphics card driver”. After you finish, hit “Next” then wait until the update completes.

Pick Up A New Monitor

Sometimes, VGA (Video Graphics Array) blue plug could be the problem. If none of the above help, change the monitor and connect using a DVI (Digital Visual Interface) cable to avoid the VGA blue plug.

Frequently Asked Questions

How can I change the monitor input?

You can use the KVM switch. In use, the switch is able to switch input and USB control in a blink of an eye. If your monitor packs more than one input, hook both up to the monitor and use the monitor’s OSD.to switch between them.

How do I reinstall drivers for NVIDIA video card?

  • Step 1: Launch your web browser, go to NVIDIA website and download the drivers for your model of video card.
  •  Step 2: Open Control Panel then hit Uninstall a program under Programs. Next, scan the list, locate “NVIDIA driver” and uninstall it.
  • Step 3: Restart your PC. The moment the screen returns, install the card drivers you just downloaded.

Leave a Comment